CY-801 FluffyEconomic AminoCapping Agent
CY-801 fluffy economical amino sealing agent is an intermediate of economical ternary copolymer silicone oil developed by our company for a large number of intermediaries. The synthesis of ternary copolymer silicone oil is as simple and cost-effective as synthesizing amino silicone oil.1、 Product features:
1.Simple operation and synthesis ; less investment, low equipment requirements,commonly used with equipment for
producing amino silicone oil
2. It has extremely high cost-effectiveness.3. The quality control of silicone oil is convenient and the batch stability is good.
Product style: Soft and fluffy with good fluffiness; It has good smoothness and is particularly suitable for cellulose fibers such as chemical fibers, cotton, viscose, and blended fabrics. Different styles of silicone oil can be made according to different ratios.
2、 Physical and chemical indicators
Appearance:Canary yellow to dark yellow transparent or slightly viscous liquid
3、 Recommended process:
1. Check the equipment (ensure that the vacuum degree reaches -0.08~-0.1MPa).
2. Feeding: Put D4 (or DMC), CY-801, and catalyst into the reaction kettle, stir and raise the temperature to 110 ℃~115 ℃, and keep the reaction temperature for 4-6 hours. After the viscosity meets the requirements, raise the temperature to 135 ℃~140 ℃ to break the catalyst for 1 hour, then vacuum to remove the low boiling substance, cool down and discharge the material.
Remarks: ① The catalyst is tetramethylamine hydroxide (dosage 0.5-0.8 ‰, diluted with twice the water first); Potassium hydroxide can also be used as a catalyst, but it is recommended to increase the reaction temperature to 125 ℃~130 ℃ for similar reaction times Recommended ratio: D4: CY-801=(8-30): 1.
4、 Emulsification process
1. It is recommended to use TO5, TO7, TO9 or RP50, RP70, RP90 or XL-40, XL-70, XL-90 in a ratio of 3:4:1 emulsification. The amount of glacial acetic acid used is 2-5% of crude oil, and the emulsification process is the same as that of amino silicone oil emulsification.
2. If it is used for chemical fiber, it is recommended to add 40% ethylene glycol monobutyl ether when emulsifying, and use 0~10% emulsifier to emulsify into lotion, so as to treat chemical fiber velvet fabrics with excellent fluffy, moist and silky feel.
CY-802 Economical Amino-Capping Agent For Sliding Elasticity
CY-802 soft and economical ammonia sealing agent is an intermediate of economical ternary copolymer silicone oil developed by our company for a large number of intermediaries. The synthesis of ternary copolymer silicone oil is as simple and cost-effective as synthesizing amino silicone oil.
1.Product Characteristic
1.Simple operation and synthesis ; less investment, low equipment requirements,commonly used with equipment forproducing amino silicone oil
2.Having a very high cost performance.
3.The quality control of silicone oil is convenient and the batch stability is good.
Product Style:Excellent elasticity; It has good smoothness and is particularly suitable for cellulose fibers such as chemical fibers, cotton, viscose, and blended fabrics. Different styles of silicone oil can be made according to different ratios.
2、 Physical and chemical indicators
Appearance: Light yellow to dark yellow transparent or slightly cloudy viscous liquid;
3、 Recommended process:
1. Check the equipment (ensure that the vacuum degree reaches -0.08~-0.1MPa).
2. Feeding: Put D4 (or DMC), CY-802, and catalyst into the reaction kettle, stir and raise the temperature to 110 ℃~115 ℃, and keep the reaction at insulation for 4-6 hours. After the viscosity requirements are met, raise the temperature to 135 ℃~140 ℃ to break the catalyst for 1 hour, and then vacuum to remove the low boiling substance. Cool down and discharge the material.
Remarks: ① The catalyst is tetramethylamine hydroxide (dosage 0.5-0.8 ‰, diluted with twice the water first); Potassium hydroxide can also be used as a catalyst, but it is recommended to increase the reaction temperature to 125 ℃~130 ℃, with similar reaction times. ② Recommended ratio: D4: CY-802=(8-75): 1.
4、 Emulsification process
1. It is recommended to use TO5, TO7, TO9 or RP50, RP70, RP90 or XL-40, XL-70, XL-90 in a ratio of 3:4:1 emulsification. The amount of glacial acetic acid used is 2-5% of crude oil, and the emulsification process is the same as that of amino silicone oil emulsification.
2. If it is used for chemical fiber, it is recommended to add 40% ethylene glycol monobutyl ether when emulsifying, and use 0~10% emulsifier to emulsify into lotion, so as to treat chemical fiber velvet fabrics with excellent soft, moist and silky feel.
CY-803 Fluffy Style Amino Capping Agent
CY-803 soft style amino sealing agent is an intermediate of style ternary copolymer silicone oil developed by our company for a large number of intermediaries. The synthesis of ternary copolymer silicone oil is as simple, fast, and stylish as the synthesis of amino silicone oil.
1、 Product Features
1.Simple operation and synthesis ; less investment, low equipment requirements, commonly used with equipment for producing amino silicone oil
2.Having a very high cost performance.
3.The quality control of silicone oil is convenient and the batch stability is good.
Product Style:Excellent softness and smoothness, especially suitable for cellulose fibers such as chemical fibers, cotton, viscose, and blended fabrics. Different styles of silicone oil can be made according to different ratios.
2、 Physical and chemical indicators
Appearance: Light yellow to dark yellow transparent or slightly cloudy viscous liquid;
3、 Recommended process:
1. Check the equipment (ensure that the vacuum degree reaches -0.08~-0.1MPa).
2. Feeding: Put D4 (or DMC), CY-803, and catalyst into the reaction kettle, stir and raise the temperature to 110 ℃~115 ℃, and keep the reaction at insulation for 4-6 hours. After the viscosity requirements are met, raise the temperature to 135 ℃~140 ℃ to break the catalyst for 1 hour, and then vacuum to remove the low boiling substance. Cool down and discharge the material.
Remarks: ① The catalyst is tetramethylamine hydroxide (dosage 0.5-0.8 ‰, diluted with twice the water first); Potassium hydroxide can also be used as a catalyst, but it is recommended to increase the reaction temperature to 125 ℃~130 ℃ for similar reaction times Recommended ratio: D4: CY-803=(8-30): 1.
4、 Emulsification process
1. It is recommended to use TO5, TO7, TO9 or RP50, RP70, RP90 or XL-40, XL-70, XL-90 in a ratio of 3:4:1 emulsification. The amount of glacial acetic acid used is 2-5% of crude oil, and the emulsification process is the same as that of amino silicone oil emulsification.
2. If it is used for chemical fiber, it is recommended to add 40% ethylene glycol monobutyl ether, and use 0~10% emulsifier to emulsify into lotion, so as to treat chemical fiber velvet fabrics with excellent soft, fluffy, moist and silky feel.
